PUBLICATION (ICESTA 2021)
Publication at Defect and Diffusion Forum
No |
Article |
Link |
1 |
Silicone for lithium battery anode derived from geothermal silica through magnesiothermic reduction and double stage in acid leaching |
https://www.scientific.net/DDF.417.191 |
2 |
Utilization of Cu-foil waste as a high-capacity anode material for high performance LiNi0.8Co0.1Mn0.1O2/CuO@Graphite Batteries |
https://www.scientific.net/DDF.417.207 |
3 |
Economical hydrometallurgical routes for LiFePO4/C cathode materials fabrication |
https://www.scientific.net/DDF.417.177 |
4 |
Synthesis of nickel cobalt manganese ternary transition metal oxide from mixed hydroxide precipitate as a precursor to NCM811 |
https://www.scientific.net/DDF.417.131 |
5 |
Experimental and Numerical Investigation of A Low Temperature Proton Exchange Membrane Fuel Cell (PEMFC) With Different Fuel Flow Rate To Improve Fuel Cell Performance |
https://www.scientific.net/KEM.924.153 |
6 |
Effect of Conductive agents on Electrochemical Performance of Water-Based LiNi0.6Mn0.2Co0.2O2 Cathodes for Cylindrical Cells Production of Lithium Ion Battery |
https://www.scientific.net/DDF.417.169 |
7 |
Electrochemical Performance of a Water-based LiFePO4 Cathode for Li-Ion Batteries |
https://www.scientific.net/DDF.417.163 |
8 |
Synthesis and Characterization of Cobalt Free LiNiO2 Substituted by Al-doping from Beverage Cans Via Solid-State Method |
https://www.scientific.net/DDF.417.153 |
9 |
LiNi0.7Mn0.3O2 as a Cheap Cobalt Free Nickel Rich Cathode Material for High-Performance Li-Ion Batteries |
https://www.scientific.net/DDF.417.141 |
10 |
Synthesis of Lithium Titanium Oxide (Li4Ti5O12) through Sol-Gel Method and the Effect of Graphene Addition for Lithium-Ion Battery Anodes |
https://www.scientific.net/DDF.417.227 |
11 |
Effect of Synthesis Temperature on Structural and Magnetic Properties in Hematite (α-Fe2O3) Nanoparticles produced by Co-precipitation Method |
https://www.scientific.net/DDF.417.219 |
Publication at Solid State Phenomena
No |
Article |
Link |
1 |
Synthesis and Characterization Cellulose Acetate Membrane from Cigarette Butts as Polymer Electrolyte for Lithium Ion Battery |
https://www.scientific.net/SSP.334.182 |
2 |
Electrospun Poly(vinylidene fluoride) containing SiO2 as Li-ion Battery Separator: Effect of SiO2 Colloidal Volume Ratio |
https://www.scientific.net/SSP.334.175 |
Publication at Materials Science Forum
No |
Article |
Link |
1 |
Synthesis of BaTiO3 ceramics using co-precipitation and solid-state reaction method with sintering temperature variation |
https://www.scientific.net/MSF.1064.89 |
2 |
Sintering Temperature Effects on Photocatalytic Activity of SrTi0.80Mn0.20O3 |
https://www.scientific.net/MSF.1064.109 |
Publication at Key Engineering Materials
No |
Article |
Link |
1 |
A Novel Synthesis of Cathode Material NaNi0.5Ti0.5O2 for Sodium-Ion Batteries |
https://www.scientific.net/KEM.924.167 |
2 |
Experimental and Numerical Investigation of A Low Temperature Proton Exchange Membrane Fuel Cell (PEMFC) With Different Fuel Flow Rate To Improve Fuel Cell Performance |
https://www.scientific.net/KEM.924.153 |
Publication at Open Engineering
No |
Judul |
Link |
1 |
An environmental friendly hydrometallurgy process for recovery and reuse of metals from spent lithium ion batteries using organic acid |
https://www.degruyter.com/document/doi/10.1515/eng-2022-0050/html |
2 |
Review of Various Sulfide Electrolytes Types for Solid State Lithium Ion Batteries |
https://www.degruyter.com/document/doi/10.1515/eng-2022-0043/html |
3 |
Pr-doped BiFeO3 Thin Films Growth on Quartz Using Chemical Solution Deposition |
https://www.degruyter.com/document/doi/10.1515/eng-2022-0046/html |
4 |
Cu-foil Modification for Anode Free Lithium Ion Battery from Electronic Cable Waste |
https://www.degruyter.com/document/doi/10.1515/eng-2022-0041/html |
5 |
Optimization type of Filler on Electrochemical and Thermal Properties of Gel Polymer Electrolytes Membranes For Safety Lithium Ion Batteries |
https://www.degruyter.com/document/doi/10.1515/eng-2022-0045/html |
No |
Judul |
Link |
1 |
The release of hydrogen from NaBH4 with Ni-Cu-B/hydroxyapatite as the catalyst |
https://www.tj.kyushu-u.ac.jp/evergreen/contents/EG2022-9_2_content/ |
2 |
Synthesis and characterization of NMC622 cathode material modified by various cheap and abundant transition metals |
|
3 |
Experimental and Simulation Investigation On Savonius Turbine: Influence of Inlet-Outlet Ratio Using A Modified Blade Shaped To Improve Turbine Performance |
|
4 |
The Synthesis of Activated Carbon from Waste Tyre as Fuel Cell Catalyst Support |
|
5 |
Synthesis and Characterization of NMC 811 by Oxalate and Hydroxide Coprecipitation |
|
6 |
High Porous and Thermally Stable poly(vinylidene fluoride) Separator : Effect of Solvent and Colloidal SiO2 Concentration |
|
7 |
Heat Management on LiFePo4 Battery Pack for Eddy Current Brake Energy Storage on Rapid Braking Processes |
DOCUMENTATION (ICESTA 2021)